Polytunnel Irrigation

For those with Polytunnels, an efficient and cost-saving irrigation system is essential. Our overhead irrigation system eliminates the need to manually water your Polytunnel with cans and pipes, and ensures that you receive the optimal amount of water for it everyday - no matter the climate or season. Consisting of a header pipe, down tubes, sprinklers, an inline tap, pressure regulator, and hose connector, this system is easy to install and maintain - effectively paying for itself through time and cost savings. Our 30cm downtubes come equipped with weights for secure hanging and a stable sprayer, which help keep the water lines primed and ready for use. Get the most out of your Polytunnel with our superior overhead irrigation system - shop now!

Various irrigation kits for all sizes of polytunnels. If you don't see what you want let us know.

Sort by:

View

Showing 1 - 8 of 8 products
Showing 1 - 8 of 8 products

LDPE pipe is a flexible, chemical‑resistant polyethylene tubing widely used for irrigation, food/beverage transfer, pneumatic control systems, and low‑pressure fluid transport. It is valued for its softness, durability, and corrosion resistance.

The 20mm pipe has an O/D of 20mm with a wall thickness of 1.65mm and an I/D of 16.7mm.

The 25mm pipe has an O/D of 25mm with a wall thickness of 2.1mm and an I/D 20.8mm.

20mm Pressure regulator will help to ensure that your water pressure is regulated to the ideal rate for the components you are using

A versatile 5‑litre pressure sprayer suitable for a wide range of garden and polytunnel tasks, including applying water, fertilisers, pesticides and detergents. The adjustable nozzle allows you to switch between mist, cone and jet settings, giving you precise control for different applications.

Key Features

  • Adjustable Spray Nozzle: Choose between mist, cone or jet for flexible use.

  • Easy On/Off Control: Trigger mechanism provides simple, reliable operation.

  • Wide Neck Opening: Makes filling and mixing solutions quick and mess‑free.

  • Ergonomic Pump Handle: Ensures smooth pressurisation with minimal effort.

  • Pressure Relief Valve: Adds safety by releasing excess pressure when needed.

  • Translucent Bottle: Lets you easily monitor fluid levels at a glance.

  • Carrying Strap Included: Helps reduce fatigue during extended use.

  • A practical, budget‑friendly sprayer that’s ideal for everyday garden maintenance and polytunnel care.

By using 16mm pipe fittings, an endless combination of watering's can be achieved. T's for multiple runs, ball valves for areas not in use etc.

Three roll sizes available 25m / 50m and 100m Starting at £25.00

Diameter: 16mm

Working Pressure: 0.5-3bar/7.5psi - 45psi

Working Length: 50m (max.)

Watering Rate: 2-6litres/metres/hour.

The Female Tap Adaptor and the 16mm Male Hosetail are not included with the Soaker Hose.

Soaker hose parts  -  Soaker Hose Starter Kits

The Porous Pipe Soaker Hose is the original and still the best low‑water irrigation solution. Made in the UK from recycled material to ISO9001 standards, it delivers gentle, precise watering for borders, fruit and veg beds, greenhouses, and cloches — while using up to 70% less water than traditional methods.

Water is released directly at the roots, reducing evaporation and cutting down on watering frequency. Suitable for gardens of any size, it works reliably even on sloping ground and can be cut to length as needed. Depending on soil type, water permeates approximately 50cm either side of the hose for even, efficient coverage. 

Diameter: 16mm

Working Pressure: 0.5-3bar/7.5psi – 45psi

Working Length: 50m (max.)

Watering Rate: 2-6litres/metres/hour

The Female Tap Adaptor and the 16mm Male Hosetail do not come complete with the Soaker Hose.

Soaker Hose Parts

A reliable, easy‑to‑use 5‑litre pressure sprayer ideal for applying plant protection products, liquid fertilisers, and for gentle watering of young seedlings. The fully adjustable nozzle lets you switch effortlessly between a fine mist and a hard jet, giving you precise control for different tasks around the garden.

Key Features

  • Adjustable Nozzle: From fine mist to strong jet for versatile application.

  • Large Filling Opening: Makes filling and mixing liquids simple and mess‑free.

  • Stable Base: Moulded feet provide secure standing on uneven ground.

  • Safety Valve: Quickly releases pressure when needed; designed for up to 0.3 bar.

  • Comfortable to Carry: Includes a padded shoulder strap for easy movement around the garden.

Compatable with 6ft , 8ft, 12ft and 14ft wide polytunnels.

This overhead irrigation system is designed to suspend neatly below the central ridge of your polytunnel, providing broad, even coverage across the growing area. Each kit is supplied with a header pipe, down‑tubes, sprinklers, inline tap, pressure regulator, and hose connector.

The 30 cm down‑tubes feature a weighted end to ensure they hang straight, along with a stable anti‑drip sprayer that keeps the lines primed and ready for instant start‑up. It’s a simple, reliable way to achieve consistent watering while reducing labour and water waste.

This starter kit includes everything needed to build a reliable, low‑water irrigation system using the original and still the best Porous Pipe Soaker Hose. Made in the UK from recycled materials

Included in the starter kit.

Roll of Soaker Hose

Ten tap barb valves

Ten T-barbs

Ten straight barbs

Ten elbow barbs

Ten blank ends

Two female tap adaptors

Two 16mm hose-tail

Two 1/2 inch hose connectors.

By using 16mm pipe fittings, an endless combination of watering's can be achieved. T's for multiple runs, ball valves for areas not in use etc.

Three roll sizes available 25m / 50m and 100m.

Diameter: 16mm

Working Pressure: 0.5-3bar/7.5psi - 45psi

Working Length: 50m (max.)

Watering Rate: 2-6litres/metres/hour.

Need extra fittings