Irrigation Kits

This Handy 5 Litre Pressure Sprayer is ideal for a range of tasks, such as spraying water, fertiliser, pesticides and detergents. There is a trigger to allow straightforward on/off control and an adjustable spray nozzle, from mist to cone to jet. The sprayer bottle features a wide neck to facilitate easy filling and the ergonomic pump handle ensures easy pressurisation; there is also a pressure relief valve. The bottle is translucent to allow you to easily check the fluid level. Comes complete with a carrying strap to help reduce fatigue.

By using 16mm pipe fittings, an endless combination of watering's can be achieved. T's for multiple runs, ball valves for areas not in use etc.

Three roll sizes available 25m / 50m and 100m Starting at £25.00

Diameter: 16mm

Working Pressure: 0.5-3bar/7.5psi - 45psi

Working Length: 50m (max.)

Watering Rate: 2-6litres/metres/hour.

The ''Gardena''  Pressure Sprayer 5ltr is ideally suited for plant protection products, fertilisers and gentle irrigation of seedlings. The nozzle on this pressure sprayer is fully adjustable from a fine mist to a hard jet, with a large filling opening for added practicality for filling and mixing up liquids. The moulded feet allow for stable standing on uneven surfaces in and around your garden. This pressure sprayer is also equipped with a safety valve that quickly reduces pressure when required for safety and is designed for up to .3 max bar. For comfortable carrying around the garden this sprayer comes with a padded shoulder strap.

Compatable with 6ft , 8ft, 12ft and 14ft wide polytunnels.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.

Included in the starter kit.

Roll of Soaker Hose

Ten tap barb valves

Ten T-barbs

Ten straight barbs

Ten elbow barbs

Ten blank ends

Two female tap adaptors

Two 16mm hose-tail

Two 1/2 inch hose connectors.

By using 16mm pipe fittings, an endless combination of watering's can be achieved. T's for multiple runs, ball valves for areas not in use etc.

Three roll sizes available 25m / 50m and 100m.

Diameter: 16mm

Working Pressure: 0.5-3bar/7.5psi - 45psi

Working Length: 50m (max.)

Watering Rate: 2-6litres/metres/hour.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.

This system suspends below central ridge of the polytunnel. Supplied with a header pipe, down tubes, sprinklers, inline tap, pressure regulator and hose connector. The system features 30cm downtubes incorporating a weight to make sure it hangs true, and an anti-drip device with stable sprayer which keeps the spray lines primed and ready for instant start-up.